Story

Two developments supplied with Ability Projects Matrix fan coil units – Horizon House and Salisbury Law Courts – were honoured at the 2010 BREEAM Awards ceremony at the recent Ecobuild show. Energy efficient Matrix fan coil units, unique in the UK, enable each air duct / grille to be balanced for air volume through fan speed alone, removing the need for costly, noisy volume control dampers and their time consuming installation.

Buildings short listed for the awards were drawn from those achieving BREEAM ‘excellent’ ratings under various BREEAM schemes during 2009. To gain an ‘excellent’ rating, developments must earn most of the performance credits available in energy, materials, waste, water, ecology, pollution, transport, management, health and wellbeing categories.

Salisbury Law Courts is the second Ability Projects Matrix project within 3 months to receive a high level BREEAM rating (72.5%) and follows the highest ever 85.06% rated Horizon House HQ. The law courts installation comprises more than 70 Matrix 270 chassis type horizontal 4 pipe fan coil units supplied with Alerton BACnet open protocol intelligent controllers supplied by Ability, factory pre wired to the fan coil and complete with dedicated software and Sontay sensors. Developed specifically for use on Matrix fan coil units, the controller incorporates modulating valve control and on coil temperature sensing etc and also offers system users wire less, lap top access to all fan coil features and settings without needing access to the ceiling void.

Commenting on the awards, Andrew Brooks, Matrix product manager stated “We were pleased to learn of the offices award but to win the courts category as well was a real bonus. Although our contribution is a relatively small part of the overall projects, our controllers are highly energy efficient and consequently achieved very high credit scores. The outcome is testament to the specifying consultants who demanded the most efficient fan coil units on the market. Tenants in the two award winning buildings will benefit from the resultant economic running costs for many years to come.”

View Ability Projects's profile:

Story

Hambleside Danelaw is hitting the road to extol the benefits of GRP roofing products to the building industry.

The Group is participating in the CPD RoadSeminar Tour throughout the UK with dates scheduled for the remainder of 2010. Architects, specifiers and contractors will be able to choose from four different Hambleside Danelaw presentations covering:

• the advantages of specifying GRP roofing systems
• the environmental benefits of choosing GRP
• how green roofs can suit larger as well as smaller projects
• GRP rooflights as the energy saving and low carbon choice.

The first set of seminars provides an overview of what can be achieved with GRP roofing systems and how they differ from alternative systems. They will include information on material safety; installation; new build and re-roofing; features and benefits of different roofing materials; requirements for heritage projects; case studies and considerations for the environment including water run-off.

Maximising recycling opportunities and minimising waste by choosing GRP will also heavily feature as elements of the Hambleside Danelaw presentations. The contents of the presentations have been given a RIBA seal of approval.

The CPD tour follows Hambleside’s recent enhancement of its range of Dryseal GRP component based roofing systems for flat and low pitched roofs that come with the easy ‘Fit and Finish’ installation.

Promoted in partnership with RIBA, the seminars are being organised by the CPD Certification Service, meaning that the content of training courses, papers delivered at seminars and other educationally beneficial material conform to universally accepted Continuous Professional Development guidelines.

Robin Jeffery, Hambleside Danelaw’s vice chairman, said: “Hambleside Danelaw is pleased to have the opportunity to explain the advantages of specifying GRP roofing products with their strong environmental credentials as a cost-effective solution in a period of economic uncertainty. Seminar attendees will learn how GRP is durable, safe and easy to install, environmentally efficient and sustainable at the same time as making a building look good.”

The Hambleside seminars will be presented by Paul Jubb and the Group’s appointed agent for Dryseal, Mike Billett, will be on hand to deal with inquiries immediately afterwards. The venues and dates for the CPD RoadSeminar Tour 2010 are:

View Hambleside Danelaw's profile:

Story

To provide flicker free and near silent operation Hamilton Litestat has developed an Intelligent Trailing Edge Push On/Off Dimmer which has been included within its new slimline Linea range which has been developed to address the higher specification demands required for the top end of the market.

Featuring split finishes, along with the company’s Patented CFX concealed fixing system, Linea affords seamless styling and sophistication. Available in a choice of five different styles including the Linea Rondo in the exciting new ‘Piano Black’, its exclusive design has minimized the plate depth to create a modern appearance that adds lustre to an interior design scheme.

This new Push On/Off Dimmer features a 250W/210va dimmer module, from Hamilton’s Grid It Range, which has unidirectional protection and is able to detect a number of fault conditions including over current, no load protection and temperature cut-out. When a fault is detected the dimmer will switch off and either automatically turn back on when the fault is rectified or, in the case of the no load condition, it will need the fault to be resolved before it can be manually switched on. This capability reduces the risk of damage to either the dimmer or any transformers in the lighting circuit.

Suitable for use with tungsten, low voltage and halogen light sources, as well as electronic transformers this new grid dimmer module has incorporated ‘soft start’ technology to prolong lamp life, whilst removing the necessity to de-rate for mains voltage halogen lamps. Multi-positional control can be achieved with the addition of push to make rocker switches which are connected to the master push on /off dimmer unit via a suitable 2 core plus earth cable. Control from these switches allows for on /off function only

This latest product innovation from Hamilton Litestat has been manufactured to comply with the requirements of BSEN 60669-2-1 and designed to fit wall boxes complying with BS4662:2006.

View Hamilton-Litestat's profile:

Story

Connstructing Excellence in the North East (CENE) has recognised Fendor’s innovative approach to fenestration by short listing the company within its annual awards. The nomination is for the Innovation category, and is awarded to companies that combine new product technology to create systems and products that enhance best practice in the workplace and the environment.

Fendor’s dedication to innovation extends throughout its operations, from design & manufacture through to installation. The company has earned an enviable reputation for high security fenestration, installing windows, doors, facades and curtain walling for some of the most prestigious and high profile establishments in the UK. These include Rampton, Broadmoor and Carstairs, high security hospitals. The company also lists Kings Cross, the BALTIC Centre for contemporary art and the Dorchester Group’s ‘45 Park Lane’ within its commercial innovations.

2006 saw the company invest in new aluminium systems, to become the only UK manufacturer to combine steel and aluminium to create a hybrid frame. It is also the only UK Company to manufacture windows to the BRE LPS1175 security rating 3 and 4.

A new range of four products was launched in November 2009 to wide acclaim: comprising of a micro motor for both sliding and hinges windows, an anti ligature trickle ventilator, as well as a handle operated slipper clutch and adjustable clutch which allows a window to be operated remotely to ensure patient comfort and security.

“We are delighted to have been shortlisted for this prestigious award,” says Chris Duffy , managing director of Fendor. “We are committed to ensuring that our products and systems are the best in the marketplace and we are proud that CENE has recognised our continuous research, development and investment.”

View Crittall Fendor's profile:

Story

Megger Group today announces that it is to acquire Pax Diagnostics of Sweden. Pax transformer testing and insulation diagnostics products will be a strong addition to the Megger range of test instruments for the power industry.

• Predictive and conditioning capability adds to Megger’s existing transformer test offer
• All Pax employees join Megger
• Users can talk with usual contacts or Megger sales manager

Dielectric Frequency Response Analyzers Pax IDAX range of Dielectric Frequency Response Analyzers are designed for measuring moisture in power transformers as well astesting insulation material in various power system products. The IDAX300 represents the latest generation in the well known IDA/IDAX range of instruments and represents a breakthrough in terms of weight-performance ratio. With its optimized design the test set is three times smaller and lighter and performs insulation characterization twice as fast as its predecessor IDA200.

Sweep Frequency Analysis products Pax FRAX range of Sweep Frequency Analysis products are designed for detecting electromechanical changes inside power transformers. The products have the highest measurement range and accuracy in the industry and fulfil all recent international standards and recommendations for SFRA testing.

Advanced diagnostic testing technology “We have seen a growing demand for advanced diagnostic testing technology, and the inclusion of the PAX Diagnostics business enables Megger to provide a complete transformer test solution”, said Greg Wolfe of Megger, “The Pax product line coupled with the expert knowledge of Pax staff enables customers to move toward predictive test regimes, potentially saving time and money as resources can be directed toward where they are needed most”.

Natural choice “Megger is a natural choice for Pax”, said Peter Fagerström, CEO for Pax. “Our vision from the start of Pax four years ago was to be a top player in the international power transformer test equipment market. Our products fit perfect with the Megger transformer product portfolio and together we will create the strongest product line in the industry to address end user concerns”. “The Megger brand will add confidence to the Pax products” says Matz Ohlen, Marketing & Sales Director at Pax. “We invented the first DFR/FDS field instrument and now it will carry the Megger brand name, and will be supported through Megger sales and applications staff worldwide”.

View Megger's profile:

Story

Mitsubishi Electric has released details of a six-month trial which demonstrates that its specialist Melcotel™ controller has delivered a 40 per cent energy reduction for the air conditioning at Premier Inn’s new city centre site in Leicester.

The hotel has been monitored since April, with its 135 bedrooms using an average consumption of 17.20kWh a day throughout the 19 storey building. Now, with the Melcotel controller in place, the system is consuming just 7-8kWh of energy per day, – an average 40% reduction in energy consumption for the whole system.

“We believe we can also increase this further and will continue to monitor the hotel over the coming winter,” explained Mitsubishi Electric’s controls expert, Sebastien Desmottes,

The Melcotel controller works with both key card and non-key card systems to ensure that air conditioning is not working needlessly when rooms are empty or if guests decide to open a window without switching off the heating or cooling.

Specifically designed for the mass-market hotel sector, the controller is an evolution in Mitsubishi Electric’s PLC (Programmable Logic Controller) and can be retrofitted as well as being ideal for new builds.

At the start of the trial, the air conditioning was set to turn off automatically at 1am, but this still allowed guests to override the system.

Mitsubishi Electric then introduced a G50 controller which meant that the air conditioning could be programmed to automatically shut off five times a day at 9am, 11am, 1pm, 4pm, and 8pm, when there was a distinct possibility of the rooms being empty and the potential for energy to be wasted.

This lead to some reduction in energy use, but now with Melcotel, the system automatically responds to the requirements of each individual room, resetting the air conditioning to a predetermined setting and constantly monitoring the temperatures of any unoccupied rooms.

The air conditioning in these empty rooms will only come on to keep the temperature within a set range, which has the double advantage of conserving energy whilst ensuring that the room reaches the desired temperature quicker when a guest enters the room.

“We developed Melcotel after working with hotel owners who wanted a more cost effective method of maintaining low energy consumption whilst still allowing hotel guests to control the temperature in their own room,” explained Desmottes.

Temperatures are recorded by a sensor within the controller and windows can also be connected to the system so that when they are opened, the air conditioning switches off to conserve energy.

Melcotel works with Mitsubishi Electric’s advanced City Multi systems and one unit is able to control up to 250 indoor units. Wireless technology allows the Melcotel to be accessed remotely when used in conjunction with a Mini M2M offering further control and monitoring facilities to hoteliers.

View Mitsubishi Electric's profile:

Story

Providing convenience, security and courtesy lighting solutions in a range of attractive, easy to install, practical and hardwearing luminaires.

The range meets the demands of domestic and commercial installations with robust casing and extremely effective, flexible and reliable PIR and photocell options for convenience and security.

The lantern range is available as standard for use with 100w lamps or energy saving 9w lamps which provide a longer life and save up to 80% energy compared to a standard light bulb.

• Easy to install.
• IP 44
• Choice of standard, photocell and P.I.R options.
• P.I.R: Day time walk test.
• Shatter-proof Polycarbonate detector.
• P.I.R Range of 6 Metres.
• 110° Angle of detection.
• Photocell: Dusk to dawn sensor.
• Switches on at dusk and off at dawn.
• Designed to BS EN 60598-2-1.

Anti Vandal: Shatterproof Polycarbonate construction is tough, hardwearing and helps prevents damage from vandals; making it a safe alternative to glass covered units. Polycarbonate is weather resistant and UV stable. The solid black or white finished units won’t suffer from paint peel or deteriorate through weathering, the anti corrosion properties are ideal for sea front locations.

Quick Fit: This unique fast fit electrical connection features on the Globe and Coach wall mounted models. It eases installation, is quick, safe and helps prevent the end user installing the product incorrectly.

Photocell: The dusk to dawn sensor is factory set to activate the light as soon as darkness falls and turns off the light during day light hours, enhancing the security of your home (these units are for external use only).

3 Year Photocell and PIR Guarantee: Both Photocell and PIR are protected within sealed modules and as such we are confident of the highest quality operation, providing you with the confidence in your installation of ASD product.

Corner Bracket: Optional corner bracket to provide versatility of installation. Manufactured from polycarbonate the bracket can be used with both the Coach and Globe wall mounted lanterns and allows users to benefit from the ASD Unique Quick Fit connector. Each bracket is supplied with wall plugs and fixing screws.

P.I.R.: Providing proximity detection and security, allowing operation by movement and presence of intruders or visitors. The P.I.R units have a pre-set time of 2 to 3 minutes and can be switched to permanent lighting.

View ASD Lighting's profile:

Story

Specialist waterproofing contractors, Barker Goodwin, have used Triton systems to provide dual layer waterproofing at a luxury terraced property in Surrey.

In conjunction with Triton, the Barker Goodwin team specified Triton SBR admixture, liquid applied Triton TT Vapour Membrane and Platon Doubledrain cavity drain membrane to waterproof the surface of a 250 m² block and beam concrete terrace constructed over a basement. By sourcing all the above materials from Triton, Barker Goodwin were able to avoid the split responsibility issues which are often encountered in dual layer waterproofing projects and, at the same time, provide an effective, fast-track solution for their client, Leander Construction.

The specification included the incorporation of Triton SBR latex admixture to the initial screed which was laid to falls/suitable discharge drainage points, to overcome potential problematic joints within the block and beam sections.

Then, as the primary waterproofer, two coats of Triton’s liquid applied TT Vapour Membrane was applied over the screed. The two coats were applied in opposite directions, so as to avoid any pinprick holes which may have allowed moisture/water ingress to the structure below.

The secondary waterproofing layer was provided by the application of Platon Doubledrain cavity drain membrane, which provided a tough, drained protective covering to the surface.

Mortar and slabs will eventually be laid over the dual waterproofing system to provide an attractive and useful terraced area over the watertight basement.

Triton SBR improves the workability and durability of cement mixes, resulting in the cured material having a higher strength, density and water impermeability. Triton SBR will increase the flexibility and adhesive bond of a mix.

TT Vapour Membrane is a ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits

Platon Doubledrain is a cavity drain membrane designed for external use which incorporates a filter fabric layer which ensures soil cannot enter membrane cavities and obstruct drainage.

View Triton Systems's profile:

Story

As the leading manufacturer of leak free shower enclosures and bathroom pods, Taplanes provide solutions to variety of end users throughout the UK.

From universities and schools to hotels and home owners, Taplanes guarantee a long term, watertight solution. Durability, reliability and speed of installation ensure Taplanes are the first choice when specifying pre-fabricated showers.

A 12-year guarantee, site surveys and full technical support are all provided as standard.

View Taplanes's profile:

Story

A lot has changed over the last quarter of a century but one thing is still the same; ASD has always been about British manufacturing at its best. We believe that quality and service is at the core of a successful company. Manufacturing products of the highest possible standard is what ASD was about when we started, as it is today.

Over the years we have matured as a company, we’ve been in business now for 25 years and we’ve learnt a lot in that time. Being customer orientated we’re looking at all times to have the flexibility to respond to the market needs. If our customers need fast deliveries, then we ensure that we meet that requirement.

We’ve made heavy investment over the last couple of years in people, plant and machinery; this investment is continuing to secure the future with a new factory extension already underway for completion early 2008 which will provide greater efficiency, flexibility and product availability.

What we’ve also done to set us apart in the market place is invested in new product development. You only need to look at the range extensions over the last few years that we’ve made in our office, commercial & exterior ranges to meet the demands of our customers.

What we aim to do is continuously update and improve our skills in all the areas of service, quality and competitiveness. That’s what we’ve worked on over the last 25 years, that’s what we will be working on into the future. The big message is that we are investing in the future of British manufacturing to bring quality lighting products to the UK, Europe and beyond.

It’s been an enjoyable journey and I would personally like to thank every one who has been involved with ASD along the way. We wouldn’t have been able get here without the support of our customers, suppliers and importantly our staff who have worked so hard over the years.

So here’s to the next 25years, and beyond…..

View ASD Lighting's profile: