Story

Condair is launching the Condair RO-A reverse osmosis water filter, specifically designed for use with humidification systems. The Condair RO-A removes 95% of dissolved solids from a humidifier’s supply water in order to reduce maintenance, improve energy consumption and benefit ongoing running costs.

When operating on regular mains water, a steam humidifier will frequently need to drain hot water and replace it with fresh, in order to dilute mineral levels in the boiling chamber. This process requires more energy to heat the incoming cold water. It also impacts humidity control, as when the boiling chamber’s temperature drops so does the steam output. By operating a steam humidifier on reverse osmosis (RO) water from a Condair RO-A, these drain cycles are reduced by up to 97%. This in turn reduces energy and water consumption of the humidifier and enables a close humidity control of up to ±1%RH.

With the use of virtually mineral-free RO water, the lime scale build-up inside a steam humidifier’s boiling chamber is minimal, reducing humidifier servicing requirements. When used with evaporative humidifiers, this reduction in lime scale formation results in evaporative pads having a much longer lifetime. The required frequency of an evaporative humidifier’s water tank drain cycles is also reduced, saving water. Operating spray humidifiers on RO water prevents dust from precipitating into the atmosphere as the spray evaporates, improving the performance of the system.

The Condair RO-A has been designed to deliver water at an ideal quality for humidification systems, whilst minimising waste water from the RO process. Many standard RO water filters provide product water at a purity that is much greater than that required to benefit humidifiers. The high purity means more water is sent to drain during the RO process to achieve a very low mineral content. By typically removing only around 95% of the minerals, the filtered RO water effectively provides significant benefits to humidification systems with minimal water being sent to drain.

Four models are available in the Condair RO-A range, with maximum outputs of 40, 100, 200 and 300 litres per hour. The 40 and 100 litres per hour models have an integrated water tank and a single RO membrane. The 200 and 300 litres per hour models have two or three RO membranes and an external water tank with up to 100 litre storage.

An independent wall-mounted touch screen controller provides an intuitive user interface with comprehensive reporting features. Alternatively the Condair RO-A can be controlled from any Condair humidifier that incorporates a Condair touch-screen control panel.

The Condair Group is the world’s leading specialist in humidification and evaporative cooling, with energy efficient, hygienic and innovative technologies for commercial, industrial and heritage applications. Condair is represented in the UK by Condair plc, which offers system design, manufacture, supply, installation, commissioning, maintenance and spares. Condair plc is the new name for JS Humidifiers following the organisation’s rebranding in October 2014. You can find out more by visiting the company’s website at www.condair.co.uk.

View Condair's profile:

Story

Since REHAU launched its AGILA sliding doors range sales of the PVC-U doors have been steadily growing and now more fabricators than ever are choosing to specify AGILA.

AGILA sliding doors are great for modern living, letting in light and creating openness in any space. They can be installed as a traditional patio door, entrance door or door to a conservatory, and are available in eight different colour options to provide a flexible solution which can be tailored to the individual needs of the customer. A perfect fit for REHAU’s popular TOTAL70 windows system, the AGILA sliding door also offers continuity of product across larger specifications.

As well as slimmer sightlines and superior aesthetics, AGILA sliding doors are incredibly energy efficient, with a triple glazing option on offer. They also come with enhanced security options and benefit from ERA’s new Total Security Guarantee for complete peace of mind.

Currently there are ten businesses fabricating the AGILA Sliding Door across the UK and Ireland. These include Climatec, Fenster Trade Frames, GRM, Polyframe, Euroglaze, Stormking, Hadrian, Costello PVC, O’Grady UPVC Ltd and Caledonia Doors in Cumbernauld being the most recent company to come on board .

To increase interest further, REHAU has released a new video online which highlights all the great features of the AGILA sliding doors to promote the product to fabricators and their customers.

Clare Higgins, Product Manager, from REHAU said: “The AGILA sliding door has been a fantastic addition to our doors offer, providing our partners with a high quality and flexible door solution they can offer to their customers individually or as part of a full portfolio of REHAU products. With the trend for large span doors continuing to gather pace in the domestic market, we expect to see even more contractors choosing to offer our sliding doors over the coming months and years.”

For further information please visit www.rehau.uk/agila.

View Rehau's profile:

Story

WAGO, the automation, interconnection and electrical interface specialist, has agreed a deal to supply components to PP Control & Automation for use in their electrical assemblies. The agreement is the latest in a series of new supplier partnerships struck by WAGO.

As one of the global leaders in electrical control systems, cable harnesses and sub-contract manufacturing solutions, PP Control & Automation serves building services, food and beverage, medical, energy, security, semiconductor manufacturing, printing and others. Customers are increasingly demanding more complex machines with shorter lead times. “Production capacity of particular machine configurations often has to be ramped up and ramped down at short notice. For this reason, the company needs suppliers that it can trust to provide reliable components to specification in a short space of time,” says Tony Hague, managing director of PP Control & Automation.

WAGO, whose interconnection and automation products provide the backbone for critical applications are supplying DIN rail-mounted terminal blocks, power supplies, electronic circuit breakers, and automation controllers and modules.

“Customers require a higher degree of configuration than ever before,” continues Hague, “And it’s up to us to provide exactly what they need. Things can move quickly in industry, and the increasing need for agility means that good product design and effective specification at component level are critical. Even the highest standards of workmanship can’t save you from inferior components, which is why partnerships with suppliers like WAGO are so important to us.

“In every case PP Control & Automation recommends and makes use of CAGE CLAMP® technology and the security of connection that it provides. We have already, on a number of occasions, replaced more traditional screw clamp connections with CAGE CLAMP, and our customers have seen an immediate and significant improvement in connection reliability.”

Tony Hoyle, managing director, WAGO Limited, adds; “We are always pleased to know that industry-leading OEMs such as PP Control & Automation choose WAGO products, and it demonstrates the high regard in which we are held within the market. A major benefit for us is that customers who may not ordinarily have specified WAGO get to see just what our products are capable of.”

View Wago's profile:

Story

Saniflo – the UK’s leading designer and manufacturer of macerators, pumps and shower cubicles – has added a range of shower enclosures to its Kinedo portfolio, the Kinesmart.
The new range addresses a variety of modern-day bathroom design needs and can be fitted with or without profile. Whether it’s a new bathroom, a room with limited space, a wetroom or a shower with a level surface, the Kinesmart fits the bill.

In keeping with the Kinedo ethos, Kinesmart is swift and easy to install and with seven different options, there’s a configuration to suit every bathroom. The different door and hinge options include a single panel enclosure for an open shower area, a pivot door or fixed panel and pivot door option for larger spaces, a sliding door model, a pivot door and side panel enclosure, a bi-fold door with fixed glass side panel for corner installations, a quadrant design with pivot doors also for corner showers and a quadrant with sliding doors.
The vertical profiles come pre-assembled for swift installation; whilst framed models feature integrated screws at each corner so installers don’t have to worry about losing screws.
The Kinesmart swing doors can be fitted to open either inwards or outwards to fit any room and the 180 degree hinges mean the doors can fold flush with the wall to optimize space in the smallest of bathrooms.
Models with sliding glass doors have rollers pre-attached, allowing for swift installation, whilst pre-drilled slots in the profile ensure that lining up the profile with the walls and making any adjustments is easy and guarantees a perfect fit, overcoming the issue of uneven walls.
The new Kinesmart is designed to be fitted with Saniflo’s new anti-slip Kinerock shower tray made from an extremely durable and versatile patented mineral material. Easily cut to size it suits any shower area and is available in a variety of standard and large sizes and colours to suit most tastes and requirements.
Kinesmart shower enclosures feature Crystal Plus Glass, in keeping with the Kinedo range, guaranteeing easy cleaning and maintenance of the enclosure, as well as the standard two-year guarantee.

Ann Boardman, Saniflo UK Head of Marketing and Product Development, comments: “The new Kinesmart is a plug and play solution for shower enclosures. The experts at Saniflo have carefully considered every showering eventuality when creating this new range and have taken the hassle out of delivering a stunning shower enclosure. There really is a Kinesmart design to suit every bathroom, whether traditional or contemporary. And combined with our new Kinerock shower tray, Kinesmart is not only a knock-out enclosure, but it surely is the smart choice when it comes to creating the perfect showering space easily and swiftly.”

To order your copy of the new Saniflo domestic and commercial product catalogue visit www.saniflo.co.uk.

View Kinedo's profile:

Story

Saniflo has taken its 55 years of macerator pump design experience and translated it into a new range of underground pump stations for pumping residential and commercial waste water from flats, plants, outside event sites or public buildings.

The new Sanifos range consists of three models, the 110, 250 and the 500. The new products allow a pumping station to be sited outside a building and below ground where the drainage is too low for a sewer or too low for a surface mounted pumping station.

The two smaller units, the 110 and 250, are designed for the drainage of a single dwelling incorporating WC, bathroom, kitchen and utility room. With 110 litre and 250 litre tanks respectively, both units feature a single grinder pump with float activation and robust cutting blades to prevent clogging. The automatic 1500 watt motor is both powerful and quiet for unobtrusive operation and helps to discharge the waste up to a maximum height of 14m or horizontally along 110m or a lesser combination of both.

The Sanifos 500 features dual motors and is designed to work with a single dwelling with multiple storeys or multiple smaller holiday homes. It contains two separate load balanced pumps with high performance macerating systems that operate alternately for even wear and to provide a fail safe operation. In the event of overload both motors run simultaneously, or in the unlikely event of a motor fail, the other motor will take over. With a high capacity 500 litre tank the Sanifos 500 has multiple connections to take waste from bathrooms, kitchens and utility rooms in industrial or large domestic buildings.

For more information or for a copy of the Saniflo brochure please visit www.saniflo.co.uk.

For further information on the full range of Saniflo and Kinedo products please visit www.saniflo.co.uk and www.kinedo.co.uk.

View Saniflo's profile:

Story

Saniflo – the UK’s leading designer and manufacturer of macerators, pumps and shower cubicles – has added a new contemporary shower tray featuring its patented mineral material, the Kinerock, to its portfolio of bathroom products.

The Kinerock is no ordinary shower tray. Not only is it made from an extremely durable and versatile patented mineral material, it can be easily cut to measure to fit into any shower area. Available in a variety of standard and large sizes and colours to suit most tastes and requirements, the anti-slip surface reduces the risk of falling in the shower.
Kinerock is made from a mineral filler and acrylic resin. This means it is light and easy to cut to ensure a perfect fit. The gelcoat surface ensures it is durable and highly resistant to scratches and damage.

The Kinerock is an extremely comfortable, safe and versatile shower tray. The textured material offers good grip adding a feeling of security and reducing the risk of falling, and at just 40mm thick, the Kinerock offers easy access into a shower area. The material ensures the surface is not cold to touch for your comfort whilst showering.

Easy to clean and maintain, the Kinerock is kept looking pristine with just soapy water and the waste grill can be easily removed for deep cleaning.

Ann Boardman, Saniflo UK Head of Marketing and Product Development, comments: “There’s a growing trend for ultra sleek, low level shower trays due to the popularity of contemporary and easy access bathrooms. The experts at Saniflo have really come up trumps with Kinerock. It looks amazing, it feels amazing and it is secure underfoot, plus it is easy to fit and care for. We think our patented mineral material is the way forward for shower trays. End users want versatility, and any shower tray that can deliver that, such as the new Kinerock, is a bonus.”

To order your copy of the new Saniflo domestic and commercial product catalogue visit www.saniflo.co.uk

View Kinedo's profile:

Story

TROX has announced the launch of a major new fancoil range – the TROX PWX Series – which brings to the market a 25% to 35% energy efficiency improvement over alternative models, with outstanding acoustic performance, and BACnet-enabled integrated controls packages as standard.

The launch of the new TROX PWX fancoil range follows an extensive research and development programme in which the company rejected incremental product enhancements in favour of a comprehensive rethink of fancoil technology. The new products have undergone thorough in-house testing, using TROX’s test chamber (constructed to comply with ASHRAE 79, BS1397 and EUROVENT 6/3), in addition to extensive corroboration of results at an independent test facility. As a result, specifiers are able to input exact performance criteria for an extremely wide range of thermal and acoustic scenarios when planning their air conditioning schemes, instead of having to rely on less reliable ‘anticipated’ or ‘expected’ data. The TROX PWX range is therefore able to speed up the specification of projects significantly, reduce levels of risk, streamline installation and commissioning, and provide valuable environmental and cost benefits.

Whilst the basic physical dimensions of the TROX PWX units have been kept the same (270mm deep) to meet market requirements, every aspect of the thermal, electrical and acoustic performance of these models has been redesigned. With new inlet attenuators, inlet plenums and discharge attenuators, the units feature completely redesigned key components capable of achieving outstanding performance across a wide range of applications.

The SFPs across the range comply with and exceed Part L requirements, with typical values between 0.15 to 0.25 W/(l/s) at 30 Pa ESP, with a Guide NR of 35.

The environmental performance of the fancoils has been developed in conjunction with the full range of TROX air terminal device options. TROX’s unique ‘One Stop Shop’ solution enables correct selection of air terminal devices to be tailored to each fancoil. This optimises potential energy savings without compromising air distribution (a factor very often overlooked when specifying the systems independently). The ability to source the entire system from a single supplier also enables specifiers to optimise the performance of the fancoils in VAV (variable air volume) systems. The specification process has been speeded-up by the introduction of sophisticated new in-house product selection technology. This makes it possible to identify the most effective combinations of fancoils, grilles and diffusers more quickly, making it possible to specify fancoils for entire projects in just minutes, rather than hours.

The TROX PWX fancoils are supplied with specially-designed on-board controls packages, as standard. Two different STD controls packages are offered:

• BACnet control, offering the full flexibility of uniquely addressed terminal units, which interface with Building Management Systems (BMS) and provide feedback on each unit’s performance.
• TROX can also offer standalone controls that allow user control of individual units where no BMS is present.

To complement these control packages, TROX is also able to offer a full water-side control package which has been designed to work seamlessly with either control option.

These control solutions provide a number of valuable benefits. Project lead-times can be reduced significantly, as all wiring diagrams are pre-designed and readily available. This reduces the time and costs associated with additional electrical scheme design or expensive customisation of BMS programming. Specifiers also have the peace of mind that the controls technology has perfect compatibility with the fancoil units, and has been developed specifically to optimise performance in a way that is hard to replicate with ‘bolt-on’ controls.

A key factor in the development of the TROX PWX Series has been the thoroughness of testing, which removes the project risks associated with incomplete or uncorroborated performance data. By thorough testing in-house using its own BSRIA type test rig, and by sourcing detailed external data for the fancoils from extensive independent testing, TROX is bringing to the market a range of products with unrivalled, verifiable, specification data. Care has been taken to test the units at specified 30 Pascal external static pressures (ESPs) and to provide exact performance figures. This improves on industry practice where lower external static pressures might be employed during testing, culminating in misleading results.

This rigorous testing of electrical and thermal performance has been matched by extensive independent acoustic testing. The acoustic testing, carried out in accordance with BS EN 16583:2015, covers the entire PWX range, including all available fan configurations across the full operating range.

Such detailed acoustic analysis allows precise selection of units to suit the customer’s requirements and is complemented by TROX’s new selection process, enabling user adaptation of project-specific finishes that may affect the resultant room NR level. As the suspended ceiling finish has such a big impact on the room NR, TROX has worked closely with Armstrong Ceilings to pre-programme tested ceiling tile SRI values into its new calculation programme to ensure the correct acoustic assumptions are used.

The new TROX PWX Series is designed to replace the company’s earlier fancoil models. The range includes 6 different physical sizes of unit, with 9 possible airflow configurations and 16 different fan options. The units are designed for 4-pipe heating and cooling, 2-pipe cooling, or electric heating as standard. As TROX is able to supply almost every element of an air handling system, from AHUs to air terminal devices, key advantages for system designers and specifiers include the possibility of ordering the fancoils alongside VAV components and ATDs, from a single supplier, for a perfectly-integrated solution.

View TROX UK's profile:

Story

Vandex waterproofing products, including BBA certified Vandex BB75 and BBA certified Vandex Super, are now available from Triton Systems.  The introduction of these two ‘Type A’ cementitious waterproofing systems to Triton’s range will enable specifiers to source, from a single point of supply, all the waterproofing materials they need for projects where a BBA certified, combined waterproofing system is required.

Vandex BB75, a ready mixed slurry coating, is designed to waterproof vertical and horizontal concrete and masonry substrates, including awkward areas in vaults and cellars where a cavity drained system would not be appropriate.

Vandex Super is an ‘active’ formulation, designed to waterproof foundations, slabs, lift pits and construction joints by combining with the free lime and moisture present to form insoluble crystalline complexes that block capillaries and minor shrinkage cracks.

Other Vandex products, including elasticized slurries and repair mortars, will also be available through Triton from now on.

Neil Taylor, Sales Director at Triton, said, “The introduction of Vandex products to our range means we’ll be able to supply a much wider choice of Type A waterproofing systems to our customers, in particular for where a BBA certification is required for third party building warranties such as NHBC and Premier. Our Vandex products will of course be backed up by the expert technical support architects and contractors have come to expect when sourcing waterproofing systems from Triton.”

View Triton Systems's profile:

Story

The new and improved UNIFILL is the flagship product in this range and is a patented universal WC fitting which was developed for simpler installation.

Viva Sanitary, a leading manufacturer and supplier of sanitary fittings, has recently launched its new range of Skylo toilet cistern fittings in the UK. The new and improved Skylo Dual Entry 4 in 1 Fill Valve is the flagship product in this range, and we are proud to introduce it to you here.

The Dual Entry, a patented universal WC fitting, was developed to allow for quicker and simpler installation. The product was an instant success with stockists and installers alike. It meant stockists could reduce the range of fittings they stocked, which saved vital space and reduced the amount of cash tied up in product. It also gave installers peace of mind knowing that one valve could cover a wide variety of applications.

Even with the success of the first version, Viva didn’t rest on their laurels. Instead they looked for ways in which the valve could be improved, and worked with important feedback from customers to help design and implement the changes, creating the new and improved version that we offer to you today.

The new Skylo Dual Entry 4 in 1 Fill Valve which launched in September 2013 is even easier to install and has greater functionality. As with the previous version, it caters for both bottom and side entry applications and again it comes with 1/2″ and 3/8″ adaptors, incorporating four valves in one. One of the biggest improvements to the valve is the way it is adaptable for both bottom and side entry; the installer selects the application and screws the thread into the sprung loaded opening.  There is no requirement to close off the unused opening, which makes installation DIY friendly.

This image shows the valve open when thread is connected.

The float size has also been reduced and also comes with a Delayed Fill. It is able to rotate 180° so the valve can fit into the tightest of spaces and can perform even more jobs. In the event that maintenance is required, the easy-access mechanism allows for speedy and hassle-free diaphragm replacement.

If you have been won over by the benefits of using our new and improved Skylo Dual Entry 4 in 1 Fill Valve then check out our installation video:

If you have any questions, please feel free to contact our customer service team who will be happy to assist you and if you like this article don’t forget to share.

View Viva Sanitary's profile:

Story

The UK’s leading designer and manufacturer of pumps, macerators and shower cubicles, Saniflo UK, now has a stylish, easy to follow leaflet and poster spelling out all the Saniflo shower pump and shower tray possibilities.

The two-page leaflet highlights in detail the features of the Sanifloor 1 and 2, Sanifloor 3, Traymatic, Sanishower Flat and the Sanishower +, with important information about the low level and traditional height options displayed for each product, whilst the eye-catching poster provides an at-a-glance overview of the Saniflo shower pump range.

The Saniflo range of shower pumps and trays offers a solution for every type of bathroom, from uber contemporary bathrooms that require sleek, low level shower trays, which is a growing trend; to the more traditional bathrooms with step-up higher shower trays; and, there’s also a solution for wetroom applications even when floor formers are used. The height of the Saniflo shower trays ranges from 0cm to 12cm.

Ann Boardman, Saniflo UK Head of Marketing and Product Development, comments: “With the Saniflo range of shower pumps and shower trays it really is possible to have the shower you want anywhere a water supply can reach, without the need for mains drainage to be present at the site of the shower. There are subtle yet important differences between the products and this new leaflet clearly and concisely explains the best product for specific scenarios, from contemporary to traditional designs, helping industry professionals make the right choice for their clients.”

The new leaflet is being distributed to merchants and installers nationwide.

Saniflo – Shower Pumps Leaflet

Saniflo – Shower Pumps Poster

View Saniflo's profile: