explore the BusinessNet
Megger makes insulation testing even safer!
Story
Enhanced testing safety, even in demanding applications, is offered by the latest versions of the MIT and S1, 5 kV and 10 kV Megger insulation testers. All models now meet the requirements for use in CAT IV 600 V applications, in line with IEC 61010–1.
This means that the new instruments are suitable for performing measurements at the source of supply in low–voltage installations and offer immunity to high–voltage transients up to 8 kV – double the rating of their predecessors.
Another crucial benefit is that, for instruments of this class, Megger is the only supplier to fully specify the performance of the guard terminal. This specification shows that, unlike many of its competitors, Megger has achieved these important safety enhancements without compromising guard terminal performance.
As a result of this, combined with the high current capability of the testers, users can be sure of achieving fast, accurate results even in the presence of high levels of surface leakage in the equipment under test. This is important as it enhances the ability of the instrument to provide reliable information to assist in the diagnosis of faults.
Megger has also upgraded the PC based software supplied with the instruments to the latest Power DB Lite package. This allows test results to be loaded directly into test forms and certificates that are uniform in layout and appearance with the test documentation produced by many of the other power instruments in the Megger range.
Megger high–voltage insulation testers offering CATIV 600V capability are the MIT510/2 5 kV insulation tester, the MIT520/2 5 kV diagnostic insulation tester and the MIT1020/2 10 kV diagnostic insulation tester, along with their high–current S1–range counterparts, which deliver a test current of up to 5mA compared with 3mA for products in the MIT range.
The CATIV 600V rating also applies to the S1–554/2 5 kV high noise immunity tester and S1–1054/2 10 kV high noise immunity tester, which are particularly well suited for use in substation switch yards and other areas where extremely high levels of electrical noise may be present and S1–552/2 5kV high current tester and S1–1052/2 10 kV high current tester which as designed to cope with capacitive loads
To complement the new versions of its insulation testers, Megger is now supplying them, as standard, with insulated test leads rated at 5kV or 10kV depending on the type of instrument. Compact uninsulated crocodile–clip style leads continue to be available as an option.
