All posts by admin
Saniflo Sanifos improves scope of Norfolk boat house
Story
Saniflo UK – a leading designer and manufacturer of pumps, macerators and lifting stations – has helped to increase the versatility of a Norfolk boat house that overlooks the picturesque River Bure. The Sanifos 110 has enabled the installation of a drainage system allowing the creation of a room above the boat storage that can be used as occasional accommodation complete with kitchen and bathroom.
Sitting approximately 4m below and 65m from the drainage level of the on-site sewage treatment plant, discharging black and grey water waste requires a pump capable of lifting waste up and along soil pipes to meet the waste treatment plant. The Sanifos 110 is the ideal size to lift the grey and black waste and discharge the waste via 40mm pipework up to the treatment plant.
Specifier Jordan Andrews, owner of JA Plant Hire, says: “I came across this unit after a recommendation from The English Shepherd Hut Co. Two of their customers had similar requirements and the hut manufacturer proposed the Sanifos as a solution which I subsequently installed. The beauty of this unit is its size and power. It has a high quality, powerful motor at its core enabling the lift and pumping length, but it is housed in a compact unit. This means I was able to dig a much smaller hole of just 1m depth and not even 500mm width to accommodate the unit – which saves times and cost on civils. Because of the damp surroundings a large hole would have been less stable but would also have cost significantly more in labour costs.
“The Sanifos has been covered by a simple manhole cover which is flush with the ground so creates no obstruction. The outlet pipe is sited out of the way by the guttering of the boat house. Access to the unit for maintenance is still very good. The Sanifos has definitely filled a gap in the market for a small pump chamber with this capacity and performance. Delivery was also very quick. From site assessment to delivery was just 7 days. I will most certainly install further Sanifos units for projects of this type. I do a lot of sewage work and it’s great to have a product that is better suited for the smaller jobs.”
Today, the riverfront property Bureside in the Norfolk village of Horning, once home to the manager of the adjacent waterworks, is now a modern home complete with boat house and mooring at the bottom of the garden. The two-storey, cedar clad boat house is strategically positioned to maximise views over the River Bure and comprises boat storage beneath a living area with kitchen and bathroom.
Saniflo regularly delivers unique drainage solutions in some of the U.K.’s most challenging situations, including historic public and private buildings, guaranteeing continuity of usage and allowing for some remarkable conversions that help to preserve our country’s heritage.
View Saniflo's profile:
University upgrade includes Kinedo showers
Story
The iconic St David’s Building on the University of Wales Lampeter site is Wales’ oldest University building. Built between 1822 and 1857 the Grade II listed building has witnessed great change over the last two centuries and today houses the campus reception, accommodation, conference facilities, Founders Library, Chapel and a range of multi-purpose meeting spaces.
An upgrade to the building is due to be completed before the University’s bicentennial celebrations in 2022 and will provide the most modern facilities for twenty first century learning and teaching. Local firm J&E Woodwork was appointed to carry out the renovation work. With its own team of carpenters, plumbers, electricians, painters and groundsmen – who all live in close proximity of the University – the company has a brief to upgrade the building whilst being faithful to its architectural heritage.
Amongst the changes is the upgrading of the accommodation units to en-suite rooms. Daffyd Evans is a Director of J&E Woodworks and was looking for an integrated unit that avoided the need for tiling. After some initial research he approached local Builders Merchant, LBS Builders Merchant in Llandeilo for a recommendation. Based on his requested specification the Kinedo range from Saniflo was recommended as a cost-effective, time saving, yet contemporary solution and a demonstration was offered to showcase the speed and simplicity of installation. A technical engineer visited site and built a temporary unit for the J&E Woodworks team to see and, suitably impressed, 25 Kinedo cubicles were ordered including 17 Eden quadrant and 6 corner units; each featuring sliding doors.
On delivery of the initial units, a Saniflo engineer again attended and delivered a training session to the J&E Woodwork installation team. Daffyd was delighted at both the level of service delivered by Saniflo and the exceptional quality of the cubicles;
“The Kinedo Eden units were a perfect fit for the brief I gave LBS and feedback from my site team is that they go together really well and very quickly. The internal glass panels add a real touch of class but importantly the whole unit is easy to maintain and clean which was an important factor for the University. I will certainly be considering Kinedo for future bathroom projects. The service from my merchant and from the team at Saniflo was exceptional.”
Kinedo cubicles are supplied as a complete package and include showerhead, valve, handheld shower, tray, all fixtures and fittings and internal/external panels and doors. The units typically take less than half a day to install and are ready for use immediately as no tiling or silicone is required.
View Kinedo's profile:
NEW CIBSE-APPROVED DEHUMIDIFIERS CPD FROM CONDAIR
Story
Condair is offering a new online, CIBSE-approved CPD seminar on dehumidification and drying psychrometrics. The 45-minute long presentation includes training on the principles of operation for both desiccant and condensing dehumidifiers, how to correctly select and size a dehumidification system and the psychrometric processes behind drying.
The seminar has been developed specifically for mechanical engineers and consultants. The training has been CIBSE approved, therefore verified to be unbiased, up-to-date and technically accurate. As the presentation is CIBSE-approved, any attendees will receive CIBSE points towards their continuous professional development (CPD) record.
The presentation can be given online via a virtual meeting platform, such as Teams or Zoom. Condair typically delivers these online training sessions to attendees from a single company, to encourage engagement and interaction from attendees. Anyone wanting to book a session can request a date at www.Condair.co.uk/CPD.
Dave Marshall-George, UK Sales Manager at Condair, commented, “Our CPD seminars are always well received by consultants and this new one on dehumidification gives a comprehensive understanding of both the technology and the psychrometrics involved in a dehumidifier specification project. Consultants can expect to learn how the different technologies compare, when to use desiccant or condensing systems, how to calculate what size is needed, plus the many pre- and post-drying processes needed to provide air at a specific humidity condition.”
Dave continues, “Certificates are supplied to all attendees via email following the presentation, so they can register for the CIBSE points.”
The Condair Group is the world’s leading specialist in humidity control and evaporative cooling, with energy efficient, hygienic and innovative technologies for commercial, industrial and heritage applications.
View Condair's profile:
Stainless Steel Philidas Nuts
CONDAIR EXPANDS SERVICE TEAM IN THE NORTH
Story
Condair has expanded its service team and further strengthened its support for customers in the North of England with the appointment of Daniel Kirk, based out of West Yorkshire.
Daniel is an extremely experienced HVAC technician having worked on both humidifiers and dehumidifiers at SPIE UK, AMS and Newsome.
Tony Tullett, service manager at Condair, commented, “We are delighted to welcome such an experienced service engineer to our Condair team. Particularly as Daniel is not only skilled in service and maintenance of our product technologies but he also brings with him valuable installation knowledge. He is a great addition to what is already the UK’s largest specialist humidity control engineering team. His appointment takes the number of Condair service engineers to 18, spread strategically across the UK. No matter where our clients are controlling their humidity, Condair is well positioned to support them and deliver the manufacturer’s engineering knowledge on-site.”
View Condair's profile:
Bradite floors the competition
STELRAD LAUNCHES NEW ‘BOUTIQUE’ SERIES FOR BATHROOMS AND KITCHENS
Condair appoints new service engineer in Scotland
Story
Humidification specialist, Condair, has appointed Adam Norton as a humidifier service engineer based out of Edinburgh. Having a service engineer located in Scotland strengthens Condair’s strategic presence in the region and allows the company to provide a more efficient response time to its Scottish customers.
Adam joins Condair from the Royal Navy, where he spent five years as a Leading Engineer Technician and, among other things, qualified as a Nuclear Reactor Operator.
Tony Tullett, Service Manager at Condair, comments, “We are very happy to welcome Adam to the Condair service team. We are very proud to be expanding, even further, the UK’s largest specialist humidifier engineering department. Now with 18 service engineers spread across the UK, Condair is perfectly placed to support our clients wherever they may be, and deliver the manufacturer’s expertise directly on-site.”
The Condair Group is the world’s leading specialist in humidification and evaporative cooling, with energy efficient, hygienic and innovative technologies for commercial, industrial and heritage applications. Condair is represented in the UK by Condair plc, which offers system design, manufacture, supply, installation, commissioning, maintenance and spares. You can find out more by visiting the company’s website at www.condair.co.uk.
